English


韩国松星SOOSUNG卧式大拉机

This type of machine is for drawing high carbon steel wire, cold-head quality wire and various kinds of special alloy wires but for small quantity of one charge drawing. It is good for drawing steel materials needed for heat treatment after drawing because work-hardening is high at one time drawing and also suitable for drawing wire of various figures in cross section and big diameter wire only requiring no further drawing. If you adopt an A.C. motor, drawing speed is controlled by changing gears on two or three steps and you can also choose a D.C. motor for stepless speed change.

In case that ingut wire is over 25mm in diameter, you can get high productivity with this IN-LINE type machine-automatic pointing machine is set between the supply stand and dies box of the machine.

型号
SHD-34
SHD-20
拉丝轮直径(mm)
100
950
进线直径(mm)
20-34
12-20
拉丝速度(m/min)
24-48
50-100
最大拉力(kg)
20000
8500
电机功率(kw)
110
90